Dryer Washer Complete Door - W11247223

Restore the functionality and sleek look of your laundry appliance with the Complete Door Assembly (Part Number: W11247223). This is a full replacement unit that typically includes the outer and inner door panels, the viewing glass, and the internal frame. The door serves as a critical barrier to keep heat and water contained within the drum. If your door is cracked, the glass is shattered, or the frame has become warped—preventing a proper seal—replacing the entire assembly is often the most efficient way to ensure your machine operates safely and efficiently.

The W11247223 is manufactured with high-strength, heat-resistant polymers and tempered glass designed to withstand the high-speed vibrations of wash cycles and the intense heat of drying cycles. Its integrated hinge mounting points and latch receiver are precision-molded to ensure a perfect fit with your existing cabinet.

1. Safety First: Unplug the appliance from the power source. For washers, you may also want to turn off the water supply as a precaution.
2. Support the Door: Open the door fully. Since the assembly is heavy, have an assistant hold the door or place a sturdy object underneath it to prevent it from dropping once the screws are removed.
3. Unscrew the Hinges: Locate the screws securing the door hinge to the front panel of the machine. Use a screwdriver (usually a Phillips or Torx head) to remove these bolts.
4. Remove the Old Door: Carefully pull the old W11247223 assembly away from the machine. Note the orientation of the hinge and any spacers or shims.
5. Transfer Hardware (If Needed): If your new assembly does not include the hinge or the door latch/strike, you will need to unscrew them from the old door and install them onto the new one.
6. Install the New Door: Align the hinge of the new door with the mounting holes on the appliance cabinet.
7. Secure and Align: Thread the screws back into the hinge. Before tightening completely, ensure the door is level and that the latch aligns perfectly with the switch opening. Tighten all hardware securely.
8. Test the Seal: Close the door and run a short test cycle to ensure there are no leaks (for washers) or heat loss (for dryers).

• Complete Door Assembly - Part Number: W11247223
• Tempered Safety Glass: Built to resist thermal shock and high-impact vibrations.
• Heavy-Duty Frame: Reinforced construction prevents warping and ensures a consistent airtight seal.
• Ergonomic Design: Features a built-in handle area for comfortable and easy access to the drum.
• Direct OEM Replacement: Engineered for an exact match with the original factory aesthetic and specifications.
• Restores Safety: Ensures the door interlock switch engages correctly to prevent accidental operation.
• Multi-Layer Construction: Designed to keep the exterior of the door cool to the touch during high-heat cycles.