Dishwasher Water Valve - DD81-02265A

Ensure your appliance fills efficiently and prevents accidental flooding with the DD81-02265A Dishwasher Water Inlet Valve. This electronically controlled valve manages the flow of water into the dishwasher tub at the beginning of each cycle. If your dishwasher is not filling with water, is filling too slowly, or continues to leak into the tub when the machine is turned off, the internal solenoid or seal in the water valve has likely failed. Replacing this part is critical for restoring proper cleaning performance and protecting your kitchen from water damage.

Constructed with heavy-duty, heat-resistant housing and high-quality internal diaphragms, the DD81-02265A is designed to withstand fluctuating water pressure and high temperatures. Its precision-engineered solenoid ensures rapid response to the control board's signals, providing exactly the right amount of water for every load.

1. Safety First: Turn off the electrical power to the dishwasher at the circuit breaker and shut off the water supply valve (usually located under the sink).
2. Access the Valve: Remove the lower kickplate or toe panel at the base of the dishwasher to locate the water inlet valve.
3. Disconnect Connections: Place a towel or shallow pan underneath to catch any residual water. Use a wrench to disconnect the water supply line from the valve.
4. Remove the Faulty Valve: Unplug the wire harness from the solenoid and disconnect the internal rubber hose leading to the tub. Remove the mounting screws holding the old DD81-02265A valve to the frame.
5. Install the New Part: Transfer any brass fittings from the old valve to the new one if necessary, using thread seal tape for a watertight fit. Secure the new valve with the mounting screws.
6. Reconnect and Test: Reattach the internal hose, the electrical wiring, and the main water supply line. Turn the water and power back on. Run a short cycle and check all connections for leaks before replacing the kickplate.

Compatible with select dishwasher models, this OEM-quality water valve provides a reliable, factory-standard solution for your appliance's water management system.

• Dishwasher Water Inlet Valve – Part number DD81-02265A
• Reliable Flow Control: Ensures the tub fills to the correct level for optimal washing.
• Leak Protection: Prevents water from seeping into the dishwasher when not in use.
• Durable Solenoid Design: Engineered for thousands of cycles with consistent performance.
• High-Pressure Resistance: Built to handle standard household water pressure without failing.
• Direct Replacement: Matches original manufacturer mounting points and electrical connectors.
• OEM-Quality Standards: Provides a safe, high-performance alternative to generic aftermarket parts.