Washing Machine Damper Assembly - DC97-16350Y

Ensure your washing machine operates smoothly and quietly with the DC97-16350Y Damper Assembly. This shock-absorbing suspension rod is critical for stabilizing the wash tub during the agitation and spin cycles. Over time, dampers can lose their tension or wear out, leading to an unbalanced tub, excessive vibration, loud "banging" noises, or the machine "walking" across the floor. Replacing worn rods with the DC97-16350Y restores the balance of your appliance and protects internal components from vibration damage.

Built with high-tension springs and durable support housing, this assembly is designed to handle heavy laundry loads while maintaining consistent tub alignment. Its heavy-duty construction helps absorb the mechanical energy of high-speed spins, ensuring a quieter laundry room environment and extending the life of your washer's motor and frame.

1. Safety First: Unplug the washing machine from the power source and turn off the water supply lines.
2. Access the Interior: Depending on your model, remove the top cover or the front/rear panels to access the suspension system.
3. Support the Tub: Use a wooden block or have an assistant hold the wash tub to take the tension off the existing rods.
4. Remove the Faulty Damper: Unhook the top of the old suspension rod from the cabinet frame and the bottom from the tub support. You may need to apply a small amount of appliance grease to the pivot points.
5. Install the New Rod: Position the new DC97-16350Y assembly by hooking it into the tub support first, then securing the top into the cabinet frame.
6. Repeat as Needed: It is highly recommended to replace all suspension rods at the same time to ensure even tension and balance.
7. Reassemble and Test: Replace the panels, restore power, and run a test cycle to verify the machine remains stable during the spin cycle.

Compatible with select top-load washing machine models, this OEM-quality damper assembly provides the structural support necessary for smooth and reliable appliance operation.

• Washing Machine Damper Assembly – Part number DC97-16350Y
• Reduces Vibration: Effectively absorbs shock to prevent excessive shaking and noise.
• Restores Balance: Keeps the wash tub centered during high-speed spin cycles.
• Durable Spring Design: High-strength materials engineered for long-term support under heavy loads.
• Protects Appliance: Minimizes mechanical stress on the motor and outer cabinet.
• Direct Fit Replacement: Designed to meet original manufacturer specifications for easy installation.
• OEM-Quality Standards: Built for reliability and a perfect fit in compatible models.