Power Tool Carbon Brush - 176846-04

Restore the electrical conductivity and motor performance of your equipment with the Power Tool Carbon Brush 176846-04. These essential components are responsible for conducting electrical current between the stationary wires and the rotating parts of the motor. Over time, carbon brushes naturally wear down due to friction, which can lead to motor sparking, intermittent power, or a complete failure to start. Replacing worn brushes is a cost-effective way to revitalize your tool and prevent damage to the more expensive armature.

Manufactured from high-grade carbon and graphite composites, the 176846-04 brush is designed for optimal conductivity and heat resistance. Its precision-engineered spring and lead wire ensure consistent pressure against the commutator, promoting smooth motor rotation and extending the overall life of your power tool.

1. Safety First: Ensure the power tool is unplugged or the battery is removed before beginning.
2. Access the Brushes: Locate the brush covers or caps on the side of the motor housing. In some models, you may need to remove the outer casing.
3. Remove the Old Brushes: Use a screwdriver to unscrew the brush caps. The old 176846-04 brushes should slide out, often pushed by their internal springs.
4. Inspect the Commutator: Check the motor’s commutator for excessive wear or debris; wipe it clean if necessary.
5. Install New Brushes: Insert the new carbon brushes into the holders, ensuring the lead wires and springs are properly positioned.
6. Secure the Tool: Screw the brush caps back on firmly (but do not over-tighten) and reassemble the housing before testing the tool under a light load.

Compatible with select power tool models, this OEM-quality carbon brush set ensures reliable motor ignition and consistent power delivery.

• Power Tool Carbon Brush – Part number 176846-04
• Restores Motor Function – Eliminates sparking and intermittent power issues
• High-Grade Carbon Material – Designed for low friction and long-lasting wear
• Precision Tension Springs – Ensures constant electrical contact for smooth operation
• Compatible with Select Power Tools – Direct replacement for a factory-standard fit
• OEM-Quality Part – Essential maintenance component for professional-grade reliability