Lawn Garden Blade-Hi Lift, 18.75 Inch - 115-2454-03

Achieve a professional, clean-cut look for your turf with the 115-2454-03 Hi-Lift Blade. This specialized cutting blade is engineered with an aggressive upward angle on the rear edges, creating a powerful vacuum effect as it spins. This high-velocity airflow lifts grass blades upright before they are cut, ensuring a uniform height and superior bagging performance by forcefully propelling clippings into the discharge chute. If your mower is leaving behind patches of uncut grass or struggling to clear clippings from the deck, upgrading to this hi-lift blade is the ideal solution.

The 115-2454-03 is forged from high-carbon, heat-treated steel to maintain a sharp edge through extended use and resist damage from small rocks or debris. Its durable powder-coated finish provides an extra layer of protection against rust and corrosion, ensuring long-lasting performance in damp outdoor conditions.

1. Safety First: Turn off the engine and wait for all moving parts to stop. Disconnect the spark plug wire to prevent accidental starting.
2. Access the Deck: Tilt the mower on its side (ensure the air filter/carburetor side is facing up to prevent oil leaks) or use a jack to lift the mower deck.
3. Secure the Blade: Wedge a block of wood between the blade and the mower deck to prevent the blade from turning.
4. Remove the Old Blade: Use a wrench or socket to loosen the center bolt and washer. Carefully remove the worn blade.
5. Clean the Mandrel: Wipe away any grass buildup or dirt from the mounting area and spindle.
6. Install the New Blade: Place the 115-2454-03 blade onto the spindle. Ensure the "grass side" or "this side toward deck" markings are facing the correct direction.
7. Secure and Torque: Reinstall the washer and bolt. Hand-tighten, then use a wrench to ensure the bolt is torqued to the manufacturer’s specifications.
8. Final Check: Remove the wooden block, lower the mower, and reconnect the spark plug wire.

Compatible with select zero-turn mowers and lawn tractors, this OEM-quality hi-lift blade ensures maximum cutting efficiency and a pristine lawn finish.

• Lawn and Garden Hi-Lift Blade – part number 115-2454-03
• Superior Suction: Lift grass for a precision cut and enhanced bagging/discharge.
• High-Carbon Steel: Heat-treated for maximum durability and edge retention.
• Corrosion Protection: Powder-coated finish resists rust and outdoor wear.
• Balanced Design: Minimizes vibration to protect the mower's engine and spindle.
• Compatible with specific high-performance mower models.
• OEM-quality part for a perfect fit and professional-grade mowing results.